Non-Sparking Tools for Surface Preparation in Splash Zones

One of the areas of most corrosion in an Offshore Rig is the Splash Zones. Good surface preparation is a must in order for the coating to adhere correctly and provide the specified life cycle.

Such areas are particularly problematic for a grinder or a sandblaster since you don’t want to throw sparks and burn the adjacent paint or use a sandblaster and peel off unnecessary surfaces. Hauling a big heavy system and transporting the sand is unnecessary for applications like this.

Recommended Tools for Splash Zones

For such a task we recommend TFT-PNEUMATIC Safety Tools. By means of tool model FAS-1X-50 /A-0108, rotating file A-0010 and Handle model A-0060RB we are able to provide good surface preparation in the most demanding circumstances.

Benefits at a glance:

Certified and Classified as Cold Work Tools
No Hot Sparks – No damage to coatings nearby
Low Heat (average 95-105°F grinding steel)
Low Noise (<85 dBA)
No Dangerous Sharp Splinters
No Low Vibration (Average < 3.1 m/s²)
Roughness Profile 40-75 microns (2.5 mils) 1600 psi on Pull Test.

When speed and effectiveness are of the essence you can rely on TFT-PNEUMATIC Safety Tools.

Rotating File A-0010

Angle Grinder | FAS-1X-50 / A-0108

A-0060RB – Handle for rough boy

TFT-Pneumatic Safety Tools (Non-Sparking Tools)

TFT-PNEUMATIC – Safety Tools offer the most advanced Surface Preparation and cutting system in the World mainly used in Explosive Environments. As our tools are Classified and Certified as COLD WORK TOOLS by DNV, we do not require Hot Work permits, Slowdowns, Shutdowns, Habitats, Fireguards, etc.

We simply request a Blanket Permit for the Compressor, hook up the tools and start working. Spot repair is one of the jobs where our tools excel, there is no flaking of the paint and we can feather our way in and out. On top of our 2.5 mil profile and our mechanical white metal surface prep, we are the best solution for small or medium size jobs.

While the Work Units remain operational we can work in multiple areas without disturbing the asset. As Boat Owners/Operators your job is to Maximize Safety and return on investment while minimizing costs. Let us help you minimize costs by maximizing the operational time of your assets while doing it with a COLD WORK TOOL.

Don’t let corrosion and repairs get in your way. Contact us for more information, we are just a click or phone call away.

See Non-Sparking Tools