Login
Account · Log Out

TFT Pneumatic

Pneumatic tools and non sparking tools

  • Home
  • Our Story
  • Pneumatic Tools
    • Grinders
      • Angle Grinders
      • Die Grinders
      • Extended Grinders
      • Low Speed Grinders
      • Milling Machines
      • Pencil Grinder
      • Sanders
      • Straight Grinders
      • Vertical Grinders
    • Assembly Tools
      • Impact Wrenches
      • Screwdrivers
      • Pulse Tools
    • Percussive Tools
      • Chipping Hammers and Calking Hammers
      • Flux Chipper
      • Light Hammers
      • Needle Scalers
      • Sand Rammer
      • Scaling Hammer
    • Pneumatic Drills
      • Right Angle Drills
      • Heavy Duty Right Angle Drill
      • Pistol Grip Pneumatic Drill
      • D-Handle Drills
      • Heavy Duty Reversible Drills
      • Tappers
    • Other Tools
      • Air Motors
      • Pumps
      • Saws
  • Non-Sparking Tools
  • TFT Milling Discs
  • Resources
    • Information
      • About Us
      • Blog
      • Catalogs
      • Videos
      • FAQ – Frequently Asked Questions
      • Warranty and Disclaimer of Warranty
      • Terms of Use
    • Services
      • Air Tool Rental – Rent Pneumatic Tools
      • Pneumatic Tools Repair
      • Air Tools Spare Parts
  • Applications
    • Industrial Applications
      • Bolt Cutters for Explosive Atmospheres
      • Composite Repair
      • FPSO and other types of vessels
    • Surface Preparation
      • Splash Zones – Surface Preparation
      • Subsea Surface Prep and Material Removal
      • Surface prep in tight/confined areas
      • Refineries and Pipeline Surface Prep
    • Cutting
      • Cutting and Grinding in Mines
      • Refinery Tank Structure Weld Removal
      • Structure Weld Removal
  • Contact
You are here: Home / TFT Safety Tools / Cut through surfaces easily using the Compact Cutting Guide A-0420

March 31, 2020

Cut through surfaces easily using the Compact Cutting Guide A-0420

The Compact Cutting Guide A-0420 track system uses a combination of a magnet with a travel track to guide the tool back and forth a flat surface. It is designed to cut on a flat surface to remove double plating or simply cut open a manhole, etc.

Alternatively, it can be used to cut longitudinally on a piece of pipe, and many more applications. The surface does not need to be perfectly flat as the system is designed so that the tool can go up and down and follow the material.

The main advantage of this system is that it is designed to soak up most of the possible kickback generated while cutting deep with the tool. By doing so it enhances the overall user experience for the Operator who can use this type of system for prolonged periods without fatigue. All of this while greatly increasing cutting speed and precision.

As an added benefit the life span of the disc is increased, by as much as 40% in some cases. Standard system length is 20” and cutting distance is 16.5”. On request, it can be custom made to fit different lengths.

A-0420 cutting guide with A-0503 cutting disc and FCD-10X-52 tool
A-0420 cutting guide with A-0503 cutting disc and FCD-10X-52 tool.
Custom length A-0420 cutting guide with 2 magnets, A-0503 cutting disc and FCD-10X-52 tool
Custom length A-0420 cutting guide with 2 magnets, A-0503 cutting disc and FCD-10X-52 tool

Some key advantages with Cutting Guide Compact:

– The cutting speed is greatly increased due to added control

– It is a lot easier to operate the cutting tool as tool is very controllable

– The operator will not get tired using the cutter as the kickback is greatly recduced

– Longer lasting cutting disc, Users report as much as 40% – 50% life increase thus making its use cheaper

– inexpensive add on to our already proven cutting systems

Suction Cup System

As an added benefit the system can be setup with a suction cup system. This setup is particularly helpful when cutting stainless steel and non-magnetic surfaces/materials. See below for this kind of setup.

A-0420 cutting guide with A-0503 cutting disc and suction cup
A-0420 cutting guide with A-0503 cutting disc and suction cup
A-0420 cutting guide with A-0503 cutting disc and suction cup
A-0420 cutting guide with A-0503 cutting disc and suction cup
Need a price? Contact us here, and we will get back to you with a quote for your tools.
Request a Quote
Rent any pneumatic tool or grinding kit daily, weekly or monthly. We ship worldwide. Rent an Air Tool
TFT-Pneumatic is a leading distributor of pneumatic tools, non-sparking tools, and cutting and grinding wheels. We carry FUJI Air Tools and TFT Safety Tools, and ship worldwide.
Pneumatic Tools
Non-Sparking Tools
Cutting and Grinding Wheels
© 2025 TFT-Pneumatic, LLC | O. 713.862.4851 F. 713.862.4837 | 6807 Wynnwood Ln Houston, Tx 77008 | E-mail: info@tft-pneumatic.com
×