Pneumatic tools and non sparking tools
Rotating File A-0001
A-0001 – is our smallest rotating file. It may be used where other rotating files may not access such as inside holes, pin holes, deep edges and around bolts and nuts. These rotating file can be used in conjunction with our straight grinder model FG-2XV-50 or our angle die grinder model FCD-6X-51. This rotating file can only be used together with either of the mentioned tools as it is part of a System that has been Classified as COLD WORK and CERTIFIED for use in Explosive Environments by DNV. While this tool does not requiere water to retai its certification, we have developed a clever mechanism in case water is desired by the Operator or HSSE Personnel, for either tool the cooling cap A-0062 will work.
- Total length – 65mm
- Teeth Length – 27mm
- Weight – 76 grs
Certified Cold Work Tool
TFT-PNEUMATIC Safety tools are Classified as Cold Work Tools and Certified by DNV for use in Potentially Explosive Atmospheres. No other tool gives you greater protection. Our tools do not require Hot Work Permits, Habitats, or Fireguard.
Warranty Protection
Repair Service Available
OEM
Spare Parts
See Rotating File A-0001 in Action
See TFT Safety Tools in Action
Rotating Files for Explosive Zones Compared
 |  |  |  |  |  |  |  |  | |
Model | A-0001 Slim | A-0002 Bow Cone | A-0003 Straight Cone | A-0004 Little Papa | A-0005 Round Boy | A-0006 Al-Ti-Char | A-0007 Shorty | A-0008 Big Papa | A-0009B Big Boy B |
Total Length | 65 mm | 70 mm | 70 mm | 65 mm | 65 mm | 65 mm | 57 mm | 72 mm | 95 mm |
Teeth Length | 27 mm | 31 mm | 31 mm | 27 mm | 27 mm | 26 mm | 17 mm | 32 mm | 32 mm |
Weight | 76 g | 114 g | 110 g | 182 g | 168 g | 78 g | 194 g | 282 g | 340 g |
Micrometer Result* | Average of 76 µm (2.99 mil) surface | Average of 43 µm (1.69 mil) surface | Average of 44 µm (1.73 mil) surface | Average of 83 µm (3.26 mil) surface | Average of 53 µm (2.08 mil) surface | Average of 44 µm (1.73 mil) surface | Average of 56 µm (2.20 mil) surface | Average of 72 µm (2.83 mil) surface | Average of 63 µm (2.48 mil) surface |
Surface Texture |  |  |  |  |  |  |  |  |  |
Compatible Grinders |  Angle Grinder  Die Grinder | Angle Grinder Die Grinder | Angle Grinder Die Grinder | Angle Grinder Die Grinder | Angle Grinder Die Grinder |