Applications for our Tools
Our Tools are designed and build to be used in the most demanding circumstances.
We have three main product lines: FUJI Industrial Heavy Duty Air Tools, TFT-PNEUMATIC Safety Tools and TFT Milling Discs. These specialized tools that will help you be more efficient in the toughest work environments, perform safer, reduce costs, and increase operation comfort.
Tools for use in Explosive Zones
Our non-sparking tools line (TFT Safety Tools) is the most advanced surface preparation and cutting system in the world for us in explosive environments. As our tools are Classified and Certified as COLD WORK TOOLS by DNV, we do not require Hot Work permits, Slowdowns, Shutdowns, Habitats, Fireguards, etc.
Pipe cutting · Weld removal · Deck removal · Deck plates removal · Cutting stuck bolt heads · Drilling deck projects · Removing welds in explosive atmospheres · Engine room cutting · Grating removal · Cutting in explosive atmospheres · Surface preparation in pipe repair · Beveling · Coating maintenance · Steel Grinding · Composite wrap pipeline repair · Weld seam removal · Pipe cutting ·Drilling deck projects · Grating removal · Cutting stuck bolt heads
TFT Safety Tools are used in explosion-risk environments for:
Reduce Operating Costs
By using these certified cold work tools, you can avoid all the hassle from a Hot Work Permit or Habitats. The tools can be used in hydrocarbon-rich environments, where gas is present without all the dangers associated with using hot work tools. Our tools are so cool in fact that they can be used directly in contact with the hydrocarbon/gas. While not the economical tool as a standalone item, their ability to be used at all times, allows the Asset Owner to recover the investment many times over in as little as a few minutes of use.
Certified and Classified by DNV as Cold Work Tools
For material removal jobs in Classified Areas, you need tools that are Certified Cold Work, to avoid spending in Hot Work Permits, Habitats and fire watches or worse, shutdowns and delays. Our tools have been used for more than 15 years in the toughest places around the World.
Tungsten Carbide Grinding Tool
The TFT-PNEUMATIC Safety Tools rotating files and discs are made of a proprietary alloy based on tungsten carbide. The hardness in their Patented design is right in between the one of an industrial diamond and the one from a natural diamond. Depending on the job you may select the type to use: surface prep, grinding or cutting.
Safe to Use
Being certified cold work tools means you do not need to cover up adjacent surfaces in the work area because the tools do not produce any hot sparks that can burn through paint coatings. The work area temperature is low heat, averaging 95-105°F when grinding steel, which if you think about it is just above human body temperature. Our tools are also certified for Dust Explosive atmospheres.
